Bag feet

Bag Feet — Protect the Bottom of Your Leather Creations

Bag feet, also known as domes, cabochons or bag bottom studs, are small metal accessories that protect the bottom of leather bags, totes and suitcases. Attached to the four corners of the base, they slightly raise the creation and prevent the leather from rubbing against the ground, getting dirty or wearing out prematurely. In addition to their protective function, they provide a professional finish and an attractive decorative touch to your creations.

How to Choose the Right Bag Feet

Two criteria should guide your choice. First, the fixing system: screw-on feet (with a threaded base that is tightened into place) provide a very strong and durable attachment, while pronged feet are installed by spreading two small metal tabs apart. Then there is the finish — nickel, gold or black — which should match the other metal accessories used on your creation (clasps, rivets, buckles). Our brass bag feet, made from a strong and durable material, ensure a long-lasting product while enhancing the appearance of your designs.

How to Install Bag Feet?

Installation depends on the model. For screw-on feet, punch a small hole using a leather punch, insert the screw and tighten the base from the inside. For pronged feet, punch two slots and fold the metal tabs inward on the inside of the base. In both cases, remember to reinforce the bottom of your bag (with thicker leather or a reinforcement layer) to ensure the feet remain securely in place over time. Position the four feet symmetrically, at an equal distance from the edges.

Complete your finishing touches with our clasps and magnetic snaps, our rivets and our full range of leathercraft accessories.

Frequently Asked Questions About Bag Feet

What Are Bag Feet Used For?

Bag feet protect the bottom of your leather creations from friction and wear. Attached to the four corners, they raise the bag slightly so that the leather does not touch the ground: it stays cleaner and does not get damaged when the bag is placed down. They also provide stability and a neat, attractive finish, as found on high-end leather goods.

How Do You Attach Bag Feet to Leather?

It depends on the fixing system. Screw-on feet are installed by punching a hole with a leather punch, then tightening the base from inside the bag. Pronged feet are installed by punching two slots and folding the metal tabs inward. In both cases, reinforce the bottom of the bag for a more secure and durable attachment.

What Is the Difference Between Screw-On and Pronged Bag Feet?

Screw-on feet have a threaded base that is tightened from the inside: this is the strongest and most durable system, making it ideal for bags that are subject to frequent use. Pronged feet are attached by spreading two metal tabs apart, providing a quick installation without screws. The choice depends on the level of strength required and your preferred installation method.

How Many Bag Feet Do You Need for One Bag?

Four feet are generally used, one at each corner of the bottom of the bag, to provide good stability and even protection. For very large bags or wide bases, one or two additional feet can be added in the center. The important thing is to distribute them symmetrically so that the bag rests evenly and securely.